Mounting Instructions

Align catcher and catcher frame assembly to mower opening 

• Place Mounting Bracket on catcher frame. 
• Align vertical Mounting Bracket pin with hole in catcher frame
• Make marks on the mower showing the front-to-back position of each of the slotted holes on the Mounting Bracket 

• Mark points on these lines, 3/4" in from lawnmower edge
• Drill two 3/8" holes at these points
• Place Mounting Bracket under mower top plate
• Attach it loosely using supplied nuts and bolts

• Adjust bracket position until there is a 3/16" gap between Mounting Bracket hook and edge of mower opening
• Tighten the fastening nuts to lock the Mounting Bracket in place
• Check fit of catcher and adjust gap if necessary

• Align indicator arrow with the front end of hook
• Slide catcher back over hook and align pin hole over pin
• Drop catcher over pin to secure catcher

Use optional filler bracket if profile of mower opening leaves a gap between mower and grass catcher frame